Nabertherm N40E

Designed as chamber kilns with a wide-opening door, these models can be easily and clearly loaded, with heating elements protected in grooves.

These kilns can be used for ceramics and glass or porcelain painting or also for simple fusing works.  The infinitely adjustable air inlet opening in the door and the exhaust air opening in the roof ensure good ventilation inside the kiln and reduce cooling time.

  • Heating elements protected in grooves
  • Heating from two sides
  • Designed as a table-top model, base available as an accessory
  • Infinitely adjustable fresh air inlet
  • Dual shell housing for lower temperatures
Compare
SKU: N/A Category:

Description

Model

Max Temp Inner dim. in mm Volume in litre Outer dimensions in mm Connected load KW Electrical connection

Weight in kg

°C w  d  h W D H
N40E

N40E/R

1300

1300

350

350

330

330

350

350

40

40

640

640

800

800

600

600

2.9   1-phase

5.5  3-phase

 230V  15A

400V  20A

90

90

 

  • Multi-layer insulation with light-weight refractory bricks and energy-saving backing insulation adapted to the maximum kiln temperature
  • Only insulation materials that are not classified as carcinogenic (according to TRGS 905, Class 1 or 2) are used
  • Durable light-weight refractory brick insulation inside the kiln ensures clean firing results
  • Dual-shell housing provides for low temperatures and optimal corrosion protection. Galvanized steel sheets on the sides
  • Rugged, self-supporting, vaulted arch construction
  • Door seal “brick on brick“, precisely ingrained by hand to ensure tight sealing
  • Ergonomic charging height with 800 mm base (chamber kiln N 50 E = 500 mm)
  • Solid state relays ensure low-noise heater operation
  • Protected door contact switch
  • Infinitely adjustable air inlet damper for optimal air supply during firing and reduced cooling times included in the scope of delivery for chamber kilns from 440 litres
  • Controller mounted on kiln door and removable for comfortable operation
  • Semi-automatic air inlet flap for residual drying in chamber kilns up to 300 litres. The flap closes automatically at a set temperature and does not have to be closed manually after the drying phase.
  • Exhaust air opening in the centre back of the kiln roof ensures even extraction of the exhaust air in chamber kilns up to 300 litres
  • Motor-driven exhaust air flap in the middle of the kiln roof provides for optimal ventilation of the kiln for chamber kilns from 440 litres
  • Three year warranty.

 

You may also like…

$7,249.00$7,949.00

Clear
Qty: